BZA109 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

生产厂家

BZA109

9-fold ESD transient voltage suppressor

Philips Electronics 

Philips Semiconductors

9-fold ESD transient voltage suppressor

Product specification

BZA109

Device placement and printed-circuit board layout

Circuit board layout is of extreme importance in the suppression of transients. The clamping voltage of the BZA109 is

determined by the peak transient current and the rate of rise of that current (di/dt). Since parasitic inductances can further

add to the clamping voltage (V = L di/dt) the series conductor lengths on the printed-circuit board should be kept to a

minimum. This includes the lead length of the suppression element.

In addition to minimizing conductor length the following printed-circuit board layout guidelines are recommended:

1. Place the suppression element close to the input terminals or connectors.

2. Keep parallel signal paths to a minimum.

3. Avoid running protection conductors in parallel with unprotected conductors.

4. Minimize all printed-circuit board loop areas including power and ground loops.

5. Minimize the length of the transient return path to ground.

6. Avoid using shared transient return paths to a common ground point.

1997 Dec 01

7

Share Link: