MB91314A Series
• AVCC pin
The device has an internal A/D converter. A capacitor of approximately 0.1µF must be connected between the
AVCC pin and AVSS pin.
MB91314A Series
AVCC
AVSS
0.1µF
• Notes when the emulator is not used
To operate the evaluation MCU on the user system without connecting the emulator, treat each input pin on the
evaluation MCU connected to the emulator interface on the user system as shown below.
Emulator Interface Pin Treatment
Evaluation MCU pin name
Pin operation
TRST
Connected to the reset output circuit on the user system.
INIT
Connected to the reset output circuit on the user system.
Others
Open
• Note on operation with the PLL clock selected
On this microcontroller, if in case the crystal oscillator breaks off or an external reference clock input stops while
the PLL clock mode is selected, a self-oscillator circuit contained in the PLL may continue its operation at its
self-running frequency. However, Fujitsu will not guarantee results of operations if such failure occurs.
20