MCP1318MT-46LE/OT 查看數據表（PDF） - Microchip Technology
零件编号
产品描述 (功能)
生产厂家
MCP1318MT-46LE/OT Datasheet PDF : 44 Pages
| |||
MCP131X/2X
DC CHARACTERISTICS (CONTINUED)
Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 kΩ
(only MCP1320, MCP1321 and MCP1322), TA = -40°C to +125°C.
Parameters
Sym Min Typ Max Units
Conditions
Threshold Hysteresis MCP13XX-20 VHYS 0.020 — 0.120 V TA = +25°C (Note 3)
(Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +85°C
MCP13XX-21
0.021 — 0.126 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +85°C
MCP13XX-22
0.022 — 0.132 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +85°C
MCP13XX-23
0.023 — 0.138 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +85°C
MCP13XX-24
0.024 — 0.144 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +85°C
MCP13XX-25
0.025 — 0.150 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-26
0.026 — 0.156 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-27
0.027 — 0.162 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-28
0.028 — 0.168 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-29
0.029 — 0.174 V TA = +25°C (Note 3)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-30
0.030 — 0.180 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-31
0.031 — 0.186 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-32
0.032 — 0.192 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-33 VHYS 0.033 — 0.198 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
Note 1: Trip point is ±1.5% from typical value.
2: Trip point is ±2.5% from typical value.
3: Hysterysis is minimum = 1%, max = 6% at +25°C.
4: This specification allows this device to be used in PICmicro® microcontroller applications that require the
In-Circuit Serial Programming™ (ICSP™) feature (see device-specific programming specifications for
voltage requirements). The total time that the RST pin can be above the maximum device operational volt-
age (5.5V) is 100s. Current into the RST pin should be limited to 2 mA. It is recommended that the device
operational temperature be maintained between 0°C to +70°C (+25°C preferred). For additional informa-
tion, refer to Figure 2-35.
5: This parameter is established by characterization and is not 100% tested.
6: Custom ordered voltage trip point; minimum order volume requirement. Information available upon request.
© 2005 Microchip Technology Inc.
DS21985A-page 5
Share Link: 