MCP1318MT-46LE/OT 查看數據表（PDF） - Microchip Technology
零件编号
产品描述 (功能)
生产厂家
MCP1318MT-46LE/OT Datasheet PDF : 44 Pages
| |||
MCP131X/2X
DC CHARACTERISTICS (CONTINUED)
Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 kΩ
(only MCP1320, MCP1321 and MCP1322), TA = -40°C to +125°C.
Parameters
Sym Min Typ Max Units
Conditions
Threshold Hysteresis MCP13XX-34
0.034 — 0.204 V TA = +25°C (Note 3)
(Continued) (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-35
0.035 — 0.210 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-36
0.036 — 0.216 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-37
0.037 — 0.222 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-38
0.038 — 0.228 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-39
0.039 — 0.234 V TA = +25°C (Note 1)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-40
0.040 — 0.240 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-41
0.041 — 0.246 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-42
0.042 — 0.252 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-43
0.043 — 0.258 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-44
0.044 — 0.264 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-45
0.045 — 0.270 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-46
0.046 — 0.276 V TA = +25°C (Note 3)
(Note 6)
V TA = -40°C to +125°C
MCP13XX-47 VHYS 0.047 — 0.282 V TA = +25°C (Note 3)
(Note 6)
(Note 6)
V TA = -40°C to +125°C
Note 1: Trip point is ±1.5% from typical value.
2: Trip point is ±2.5% from typical value.
3: Hysterysis is minimum = 1%, max = 6% at +25°C.
4: This specification allows this device to be used in PICmicro® microcontroller applications that require the
In-Circuit Serial Programming™ (ICSP™) feature (see device-specific programming specifications for
voltage requirements). The total time that the RST pin can be above the maximum device operational volt-
age (5.5V) is 100s. Current into the RST pin should be limited to 2 mA. It is recommended that the device
operational temperature be maintained between 0°C to +70°C (+25°C preferred). For additional informa-
tion, refer to Figure 2-35.
5: This parameter is established by characterization and is not 100% tested.
6: Custom ordered voltage trip point; minimum order volume requirement. Information available upon request.
DS21985A-page 6
© 2005 Microchip Technology Inc.
Share Link: 