PSD813F1-A 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

PSD813F1-A

Flash In-System Programmable (ISP) Peripherals For 8-bit MCUs

STMicroelectronics 

Preliminary

6.0

Development

System

PSD813F1-A

The PSD813F1 is supported by PSDsoft a Windows-based (95, 98, NT) software

development tool. A PSD design is quickly and easily produced in a point and click

environment. The designer does not need to enter Hardware Definition Language (HDL)

equations (unless desired) to define PSD pin functions and memory map information. The

general design flow is shown in Figure 2 below. PSDsoft is available from our web site

(www.st.com/psm) or other distribution channels.

PSDsoft directly supports two low cost device programmers from ST, PSDpro

and FlashLINK (JTAG). Both of these programmers may be purchased through your local

rep/distributor, or directly from our web site using a credit card. The PSD813F1 is also

supported by third party device programmers, see web site for current list.

Figure 2. PSDsoft Development Tool

Choose MCU and PSD

Automatically Configures MCU

bus interface and other PSD

attributes.

Define PSD Pin and

Node functions

Point and click definition of

PSD pin functions, internal nodes,

and MCU system memory map.

Define General Purpose

Logic in CPLD

Point and click definition of

combinatorial and registered logic

in CPLD. Access to HDL is

available if needed.

C Code Generation

Generate C Code

Specific to PSD

Functions

Merge MCU Firmware

with PSD Configuration

A composite object file is created

containing MCU firmware and

PSD configuration.

MCU Firmware

Hex or S-Record

format

User's choice of

Microcontroller

Compiler/Linker

*.OBJ FILE

ST

PSD Programmer

PSDPro or

FlashLink (JTAG)

*.OBJ file

available

for 3rd party

programmers

(Conventional or JTAG-ISP)

9

Share Link: