VSC8122 查看數據表（PDF） - Vitesse Semiconductor

零件编号

产品描述 (功能)

生产厂家

VSC8122

Multi-Rate SONET/SDH Clock and Data Recovery IC

Vitesse Semiconductor 

VITESSE

SEMICONDUCTOR CORPORATION

Multi-Rate SONET/SDH

Clock and Data Recovery IC

Data Sheet

VSC8122

Two sets of reference frequencies for the VSC8122 are shown in Table 2. SONET reference clock frequen-

cies are as indicated, with Gigabit Ethernet frequencies listed in parenthesis. The two different sets of reference

clocks are needed since the reference clock for SONET and Gigabit Ethernet applications will be slightly differ-

ent. Internally, the VSC8122 requires a 19.44MHz reference (or 19.53MHz reference for Gigabit Ethernet). The

customer can select to provide either the 19.44MHz reference (or 19.53MHz reference for Gigabit Ethernet), or

the 2x, 4x or 8x of that reference at 38.88MHz (39.06MHz), 77.76MHz (78.13MHz) or 155MHz (156.25MHz).

The REF_SEL[1:0] inputs will program the internal divider as required to use the selected REFCK frequency.

Two reference clock inputs are provided, REFCK1 and REFCK0, to allow “on-the-fly switching” between

SONET and Gigabit Ethernet applications if desired. Since SONET and Gigabit Ethernet require different refer-

ence clock frequencies, the VSC8122 allows the user to toggle between the two reference clock frequencies

(REFCK1 and REFCK0) to supply the appropriate input clock. REF_INPUTSEL is used to toggle between the

two reference clock input frequencies; REF_INPUTSEL= “0” selects REFCK0 and REF_INPUTSEL= “1”

selects REFCK1. Either reference clock input (REFCK1, REFCK0) can be used for SONET or Gigabit Ethernet

reference frequencies. LVPECL levels are recommended for REFCK inputs (see Figure 4). If a reference clock

is unused, it is recommended that one of its inputs be tied to VCC through a 5.1kΩ resistor, the other one to

GND through a 5.1kΩ resistor.

Figure 4: REFCK Input Levels

LVPECL Level REFCK Inputs (recommended)

NON- LVPECL Level REFCK Inputs

REFCK0 /

REFCK1

VSC8122

50Ω

REFCK0 /

REFCK1

0.1µf

50Ω

VSC8122

VCC-2(1)

VTERM(1, 2)

NOTES: (1) For differential REFCK input signals, 100Ω termination between true and complement REFCK signals can be

substituted for the 50Ω to VTERM termination on each line.

(2) With the input ac-coupled, VTERM can be to any power supply required for the upstream device.

Page 4

© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012

Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com

Internet: www.vitesse.com

G52228-0, Rev 4.1

01/05/01

Share Link: