PRELIMINARY TECHNICAL DATA
AD7273/AD7274
PERFORMANCE CURVES
Dynamic Performance curves
TPC 1 and TPC 2 show typical FFT plots for the AD7274
and AD7273 respectively, at 3 MSPS sample rate and TBD
KHz input tone.
TPC 3 shows the Signal-to-(Noise+Distortion) Ratio
performance versus Input frequency for various supply
voltages while sampling at 3 MSPS with a SCLK frequency
of 52 MHz for the AD7274.
TPC 4 shows the Signal to Noise Ratio (SNR) performance
versus Input frequency for various supply voltages while
sampling at 3 MSPS with a SCLK frequency of 52 MHz for
the AD7274.
TPC 5 shows a graph of the Total Harmonic Distortion
(THD) versus Analog input signal frequency for various
supply voltages while sampling at 3 MSPS with a SCLK
frequency of 52 MHz for the AD7274.
TPC 6 shows a graph of the Total Harmonic Distortion
(THD) versus Analog input frequency for different source
impedances when using a supply voltage of TBD V, SCLK
frequency of 52 MHz and sampling at a rate of 3 MSPS for
the AD7274. See Analog Input section.
TPC 7 shows the Power Supply Rejection Ratio (PSRR)
versus Supply Ripple Frequency for the AD7274 when no
decoupling is used. See PSRR in the Terminology section.
Preliminary Technical Data
DC Accuracy curves
TPC 8and TPC 9 show typical INL and DNL performance
for the AD7276.
TP10 and TPC11 show Change in DNL and INL versus
Reference Voltage when using a supply voltage of 3V.
Power Requirements curves
TPC12 shows Maximum current versus Supply voltage for
the AD7274 with different SCLK frequencies.
See also Power versus Throughput Rate.
Typical Performance Characteristics
TBD
TBD
0
0
TITLE
TPC 1. AD7274 Dynamic performance at 3 MSPS
0
0
TITLE
TPC 2. AD7273 Dynamic performance at 3 MSPS
–12–
REV. PrB