OR3C55 查看數據表（PDF） - Agere -> LSI Corporation

零件编号

产品描述 (功能)

生产厂家

OR3C55

ORCA® Series 3C and 3T Field-Programmable Gate Arrays

Agere -> LSI Corporation 

Data Sheet

June 1999

ORCA Series 3C and 3T FPGAs

Programmable Logic Cells (continued)

Softwired LUT submode uses F4 and F5 LUTs and internal PFU feedback routing to generate complex logic func-

tions up to three LUT-levels deep. Figure 3 shows multiplexers between the KZ[3:0] inputs to the PFU and the

LUTs. These multiplexers can be independently configured to route certain LUT outputs to the input of other LUTs.

In this manner, very complex logic functions, some of up to 21 inputs, can be implemented in a single PFU at

greatly enhanced speeds.

Figure 5 shows several softwired LUT topologies. In this figure, each circle represents either an F4 or F5 LUT. It is

important to note that an LUT output that is fed back for softwired use is still available to be registered or output

from the PFU. This means, for instance, that a logic equation that is needed by itself and as a term in a larger

equation need only be generated once and PLC routing resources will not be required to use it in the larger equa-

tion.

F4

F4

F4

F4

F5

F5

F4

F4

F4

F4

F5

F5

FOUR 7-INPUT FUNCTIONS IN ONE PFU

F5

TWO 9-INPUT FUNCTIONS IN ONE PFU

F4

F4

F4

F4

F5

F5

F5

F5

F5

ONE 17-INPUT FUNCTION IN ONE PFU

F4

F4

F4

F4

ONE 21-INPUT FUNCTION IN ONE PFU

F4

3

F4

5-5753(F)

F4

F4

TWO OF FOUR 10-INPUT FUNCTIONS IN ONE PFU

KEY:

F4 4-INPUT LUT

F5 5-INPUT LUT

ONE OF TWO 12-INPUT FUNCTIONS IN ONE PFU

5-5754(F)

Figure 5. Softwired LUT Topology Examples

Lucent Technologies Inc.

15

Share Link: