OR3C55 查看數據表（PDF） - Agere -> LSI Corporation

零件编号

产品描述 (功能)

生产厂家

OR3C55

ORCA® Series 3C and 3T Field-Programmable Gate Arrays

Agere -> LSI Corporation 

Data Sheet

June 1999

ORCA Series 3C and 3T FPGAs

Programmable Logic Cells (continued)

The ripple mode can be used in one of four submodes.

The first of these is adder-subtractor submode. In

this submode, each LUT generates three separate out-

puts. One of the three outputs selects whether the

carry-in is to be propagated to the carry-out of the cur-

rent LUT or if the carry-out needs to be generated. If

the carry-out needs to be generated, this is provided by

the second LUT output. The result of this selection is

placed on the carry-out signal, which is connected to

the next LUT carry-in or the COUT/FCOUT signal, if it

is the last LUT (K7/K3). Both of these outputs can be

any equation created from KZ[1] and KZ[0], but in this

case, they have been set to the propagate and gener-

ate functions.

The third LUT output creates the result bit for each LUT

output connected to F[7:0]/F[3:0]. If an adder/subtrac-

tor is needed, the control signal to select addition or

subtraction is input on ASWE, with a logic 0 indicating

subtraction and a logic 1 indicating addition. The result

bit is created in one-half of the LUT from a single bit

from each input bus KZ[1:0], along with the ripple input

bit.

The second submode is the counter submode (see

Figure 7). The present count, which may be initialized

via the PFU DIN inputs to the latches/FFs, is supplied

to input KZ[0], and then output F[7:0]/F[3:0] will either

be incremented by one for an up counter or decre-

mented by one for a down counter. If an up/down

counter is needed, the control signal to select the direc-

tion (up or down) is input on ASWE with a logic 1 indi-

cating an up counter and a logic 0 indicating a down

counter. Generally, the latches/FFs in the same PFU

are used to hold the present count value.

K7[0]

K6[0]

K5[0]

K4[0]

K3[0]

K2[0]

K1[0]

K0[0]

CIN/FCIN

C

DQ

C

K7

DQ

K6

DQ

K5

DQ

K4

DQ

K3

DQ

K2

DQ

K1

DQ

K0

DQ

REGCOUT

FCOUT

COUT

F7

Q7

F6

Q6

F5

Q5

F4

Q4

F3

Q3

F2

Q2

F1

Q1

F0

Q0

Figure 7. Counter Submode

5-5756(F)

Lucent Technologies Inc.

17

Share Link: