TA16-Type 2.5 Gbits/s Transponder with
16-Channel 155 Mbits/s Multiplexer/Demulitplexer
Data Sheet
March 2001
Optical Characteristics
Minimum and maximum values specified over operating case temperature range at 50% duty cycle data signal.
Typical values are measured at room temperature unless otherwise noted.
Table 4. OC48/STM-16 Transmitter Optical Characteristics (Tc = 0 °C to 65 °C)
Parameter
Average Output Power: 1
Intraoffice (F-P laser)
Short Haul (DFB laser)
Long Haul:
1.3 µm DFB Laser
1.55 µm DFB Laser
Operating Wavelength:
Intraoffice (F-P laser)
Short Haul (DFB laser)
Long Haul (1.3 µm DFB laser)
Long Haul (1.55 µm DFB laser)
Spectral Width:
Intraoffice (F-P laser)
Short Haul and Long Haul (DFB laser) 2
Side-mode Suppression Ratio (DFB laser) 3
Extinction Ratio4
Optical Rise and Fall Times
Eye Mask of Optical Output 5, 6
Jitter Generation
Symbol Min
Typ
Max
Unit
Po
–10
–5
Po
–5
–2
Po
–2
0
Po
–2
0
–3
dBm
0
dBm
2
dBm
3
dBm
λ
1270
—
1360
nm
λ
1270
—
1360
nm
λ
1280
—
1335
nm
λ
1500
—
1580
nm
∆λrms
—
—
∆λ20
—
—
4
nm
1
nm
SSR
30
—
—
dB
re
8.2
—
—
dB
tR, tF
—
—
200
ps
Compliant with GR-253 and ITU-T G.957
Compliant with GR-253 and ITU-T G.958
1. Output power definitions and measurements per ITU-T Recommendation G.957.
2. Full spectral width measured 20 dB down from the central wavelength peak under fully modulated conditions.
3. Ratio of the average output power in the dominant longitudinal mode to the power in the most significant side mode under fulyl modulated
conditions.
4. Ratio of logic 1 output power to logic 0 output power under fully modulated conditions.
5. GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Generic Criteria.
6. ITU-T Recommendation G.957, Optical Interfaces for Equipment and Systems Relating to the Synchronous Digital Hierarchy.
Table 5. OC48/STM-16 Receiver Optical Characteristics (Tc = 0 °C to 65 °C)
Parameter
Average Receiver Sensitivity1:
PIN Receiver (intraoffice, short haul)
APD Receiver (long haul)
Maximum Optical Power:
PIN Receiver
APD Receiver (long reach)
Link Status Switching Threshold
Decreasing Light Input:
APD
PIN
Link Status Response Time
Optical Path Penalty (1310 nm/1550 nm)
Receiver Reflectance
Jitter Tolerance and JitterTransfer
Symbol
Min
Typ
Max
Unit
PRMIN
–20
–25
—
dBm
PRMIN
–29
–34
—
dBm
PRMAX
1
—
—
dBm
RMAX
–6
—
—
dBm
LSTD
—
TBD
—
dBm
LSTD
—
TBD
—
dBm
—
3
—
100
µs
—
—
—
1/2
dB
—
—
—
–27
dB
Compliant with GR-253 and ITU-T G.958
1. At 1310 nm, 1 x 10–10 BER, 223 – 1 pseudorandom data input.
14
Agere Systems Inc.