MCP1318MT-46LE/OT 查看數據表（PDF） - Microchip Technology
零件编号
产品描述 (功能)
生产厂家
MCP1318MT-46LE/OT Datasheet PDF : 44 Pages
| |||
MCP131X/2X
DC CHARACTERISTICS (CONTINUED)
Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 kΩ
(only MCP1320, MCP1321 and MCP1322), TA = -40°C to +125°C.
Parameters
Sym Min Typ Max Units
Conditions
VDD Trip Point (Con’t) MCP13XX-34 VTRIP 3.349 3.40 3.451 V TA = +25°C (Note 1)
(Note 6)
3.315 3.40 3.385 V TA = -40°C to +125°C (Note 2)
MCP13XX-35
3.448 3.50 3.553 V TA = +25°C (Note 1)
(Note 6)
3.413 3.50 3.588 V TA = -40°C to +125°C (Note 2)
MCP13XX-36
3.546 3.60 3.654 V TA = +25°C (Note 1)
(Note 6)
3.510 3.60 3.690 V TA = -40°C to +125°C (Note 2)
MCP13XX-37
3.645 3.70 3.756 V TA = +25°C (Note 1)
(Note 6)
3.608 3.70 3.793 V TA = -40°C to +125°C (Note 2)
MCP13XX-38
3.743 3.80 3.857 V TA = +25°C (Note 1)
(Note 6)
3.705 3.80 3.895 V TA = -40°C to +125°C (Note 2)
MCP13XX-39
3.842 3.90 3.959 V TA = +25°C (Note 1)
(Note 6)
3.803 3.90 3.998 V TA = -40°C to +125°C (Note 2)
MCP13XX-40
3.940 4.00 4.060 V TA = +25°C (Note 1)
(Note 6)
3.900 4.00 4.100 V TA = -40°C to +125°C (Note 2)
MCP13XX-41
4.039 4.10 4.162 V TA = +25°C (Note 1)
(Note 6)
3.998 4.10 4.203 V TA = -40°C to +125°C (Note 2)
MCP13XX-42
4.137 4.20 4.263 V TA = +25°C (Note 1)
(Note 6)
4.095 4.20 4.305 V TA = -40°C to +125°C (Note 2)
MCP13XX-43
4.236 4.30 4.365 V TA = +25°C (Note 1)
(Note 6)
4.193 4.30 4.408 V TA = -40°C to +125°C (Note 2)
MCP13XX-44
4.334 4.40 4.466 V TA = +25°C (Note 1)
(Note 6)
4.290 4.40 4.510 V TA = -40°C to +125°C (Note 2)
MCP13XX-45
4.433 4.50 4.568 V TA = +25°C (Note 1)
(Note 6)
4.388 4.50 4.613 V TA = -40°C to +125°C (Note 2)
MCP13XX-46
4.531 4.60 4.669 V TA = +25°C (Note 1)
4.485 4.60 4.715 V TA = -40°C to +125°C (Note 2)
MCP13XX-47
4.630 4.70 4.771 V TA = +25°C (Note 1)
(Note 6)
4.583 4.70 4.818 V TA = -40°C to +125°C (Note 2)
VDD Trip Point Tempco
TTPCO
—
±40
— ppm/°C
Note 1: Trip point is ±1.5% from typical value.
2: Trip point is ±2.5% from typical value.
3: Hysterysis is minimum = 1%, max = 6% at +25°C.
4: This specification allows this device to be used in PICmicro® microcontroller applications that require the
In-Circuit Serial Programming™ (ICSP™) feature (see device-specific programming specifications for
voltage requirements). The total time that the RST pin can be above the maximum device operational volt-
age (5.5V) is 100s. Current into the RST pin should be limited to 2 mA. It is recommended that the device
operational temperature be maintained between 0°C to +70°C (+25°C preferred). For additional informa-
tion, refer to Figure 2-35.
5: This parameter is established by characterization and is not 100% tested.
6: Custom ordered voltage trip point; minimum order volume requirement. Information available upon request.
DS21985A-page 4
© 2005 Microchip Technology Inc.
Share Link: 