FIGURE 2-1:
RESPONSE TIME
MCP23016
VDD
1
TABLE 2-2: RESPONSE TIME
Parameter
No.
Symbol
Characteristic
1
Response Time
Min Typ† Max Units
Conditions
100 — — ns Minimum time where a VDD
transition from 5.0V to 0.0V to
5.0V will cause a RESET. All
times less than 100 ns will be
filtered.
FIGURE 2-2:
TTP
TEST POINT CLOCK TIMING
2
TABLE 2-3: TEST POINT CLOCK TIMING
Parameter
No.
Symbol
Characteristic
Min Typ† Max Units
Conditions
FTP TP pin Frequency
— 1.0 — MHz Measured at TP pin,
IARES = ‘1’.
2
TTP TP pin CLK Period
— 1.0 — µs Measured at TP pin,
IARES = ‘1’.
† Data in "Typ" column is at 5V, +25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
TABLE 2-4: POWER-UP TIMER REQUIREMENTS
Parameter
No.
Symbol
Characteristic
Min Typ† Max Units
Conditions
3
TPWRT Power-up Timer Period
— 72 — ms
† Data in "Typ" column is at 5V, +25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
© 2007 Microchip Technology Inc.
DS20090C-page 21